Planet WGSW-28040 - Qos Queue

Command Guide of WGSW-28040
262
to assign the correct queue.
The queue to cos, dscp or precedence maps are used by remarking function. If the port remarking feature is enabled,
the remarking function will reference these 3 tables to remark packets.
Example:
This example shows how to map cos 6 and 7 to queue 1.
Switch(config)# qos map cos-queue 6 7 to 1
Switch# show qos map cos-queue
CoS to Queue mappings
COS 0 1 2 3 4 5 6 7
--------------------------------
Queue 2 1 3 4 5 6 1 1
This example shows how to map queue 4 and 5 to cos 7.
Switch(config)# qos map queue-cos 4 5 to 7
Switch# show qos map queue-cos
Queue to CoS mappings
Queue 1 2 3 4 5 6 7 8
--------------------------------
CoS 1 0 2 7 7 5 6 7
4.21.4 qos queue
Command:
qos queue strict-priority-num <0-8>
qos queue weight SEQUENCE
show qos queueing
Parameter:
strict-priority-num
<0-8>
Specify the strict priority queue number
weight SEQUENCE
Specify the non-strict priority queue weight value. The valid queue weight value is from