Command Guide of WGSW-28040
72
System Up Time : 0 days, 0 hours, 2 mins, 37 secs
4.4.9 system contact
Command:
system contact CONTACT
Parameter:
Mode:
Global Configuration
Usage Guide:
Use “system contact” command to modify contact information of the switch.
Example:
This example shows how to modify contact information
Switch(config)# system contact callme
This example shows how to show system contact information
Switch(config)# system contact callme
Switch# show info
System Name : Switch
System Location : Default Location
System Contact : callme
MAC Address : 00:30:4F:EF:01:02
IP Address : 192.168.0.100
Subnet Mask : 255.255.255.0
Loader Version : 1.3.0.26225
Loader Date : Thu May 17 15:19:42 CST 2012
Firmware Version : 2.5.0-beta.32811
Firmware Date : Mon Sep 24 19:33:42 CST 2012
System Object ID : 1.3.6.1.4.1.27282.3.2.10
To Next Page
Loading...
Need help?
General