Planet WGSW-28040 Command Guide

Command Guide of WGSW-28040
251
4.20.5 shutdown
Command:
shutdown
no shutdown
Mode:
Interface Configuration
Usage Guide:
Use “shutdown” command to disable port and use “no shutdown” to enable port. If port is error disabled by some
reason, use “no shutdown” command can also recovery the port manually.
Example:
This example shows how to modify port duplex configuration.
Switch(config)# interface gi1
Switch(config-if)# shutdown
This example shows how to show current admin state configuration
Switch# show running-config interfaces gi1
interface gi1
shutdown
4.20.6 jumbo-frame
Command:
jumbo-frame <64-9216>
Parameter:
<64-9216>
Specify the maximum frame size.
Default:
Default maximum frame size is 1522.

Planet WGSW-28040 Specifications

General

Brand	Planet
Model	WGSW-28040
Category	Switch
Language	English