Planet WGSW-28040 - Show Version; Show Info

Command Guide of WGSW-28040
94
Switch# show arp
Address HWtype HWaddress Flags Mask Iface
192.168.1.111 ether 00:30:4F:F1:4B:3C C eth0
This example shows how to clear all arp entries.
Switch(config)# clear arp
4.4.32 show version
Command:
show version
Mode:
User EXEC
Privileged EXEC
Usage Guide:
Use “show version” command to show loader and firmware version and build date.
Example:
This example shows how to show system version.
Switch# show version
Loader Version : 1.3.0.26225
Loader Date : Thu May 17 15:19:42 CST 2012
Firmware Version : 2.5.0-beta.32811
Firmware Date : Mon Sep 24 19:33:42 CST 2012
4.4.33 show info
Command:
show info