Planet WGSW-28040 - Clear Command

Command Guide of WGSW-28040
238
Mode:
privileged mode
Usage Guide:
This command will display ipv6 mld port max-group.
Example:
This example shows how to show ipv6 mld max-group.
Switch(config)#interface gi1
Switch(config-if)# ipv6 mld max-groups 50
Switch(config-if)#exit
Switch(config)#exit
Switch# show ipv6 mld max-group
Port ID | Max Group
---------+--------------
gi1 : 50 gi2 : 256
gi3 : 256
gi4 : 256
gi5 : 256
--More--
4.17.23 show ipv6 mld max-group action
Command:
show ipv6 mld max-group action [interfaces IF_PORTS]
Parameter:
[interfaces
IF_PORTS]
Show specifies ports max-group action
Mode:
privileged mode
Usage Guide:
This command will display ipv6 mld port max-group action.
Example:
This example shows how to show ipv6 mld max-group action.