Command Guide of WGSW-28040
235
4.17.18 show ipv6 mld snooping vlan
Command:
show ipv6 mld snooping vlan [VLAN-LIST]
Parameter:
Show specifies vlan ipv6 mld snooping info
Mode:
privileged mode
Usage Guide:
This command will display ipv6 mld snooping vlan info.
Example:
This example shows how to show ipv6 mld snooping vlan
Switch# show ipv6 mld snooping vlan
MLD Snooping is globaly disabled
MLD Snooping VLAN 1 admin : disabled
MLD Snooping oper mode : disabled
MLD Snooping robustness: admin 2 oper 2
MLD Snooping query interval: admin 125 sec oper 125 sec
MLD Snooping query max response : admin 10 sec oper 10 sec
MLD Snooping last member query counter: admin 2 oper 2
MLD Snooping last member query interval: admin 1 sec oper 1 sec
MLD Snooping last immediate leave: disabled
MLD Snooping automatic learning of multicast router ports: enabled
4.17.19 show ipv6 mld snooping forward-all
Command:
show ipv6 mld snooping forward-all [vlan VLAN-LIST]
Parameter:
Show specifies vlan of ipv6 mld forward info.
To Next Page
Loading...
Need help?
General