Planet WGSW-28040 - Voice VLAN; Voice Vlan ID

Command Guide of WGSW-28040
346
4.30 Voice VLAN
4.30.1 voice vlan
Command:
voice-vlan
no voice-vlan
Mode:
Global Configuration
Usage Guide:
Use the voice vlan global configuration command to enable the functional Voice VLAN on the device.
Use the no form of this command to disable voice vlan function.
You can verify your setting by entering the show voice vlan Privileged EXEC command.
Example:
The following example shows how to change voice vlan state from auto to oui mode.
Switch(config)# no voice-vlan
Switch(config)# voice-vlan cos 6
4.30.2 voice vlan id
Command:
voice-vlan vlan <1-4094>
Parameter:
<1-4094>
Specify the voice VLAN ID
Mode:
Global Configuration
Usage Guide: