Planet WGSW-28040 - Tacacs Host

Command Guide of WGSW-28040
45
1 | 10 | 192.168.1.111 | 49 | tackey
4.2.8 tacacs host
Command:
tacacs host HOSTNAME [port <0-65535>] [key TACPLUSKEY] [priority <0-65535>]
[timeout <1-30>]
no tacacs [host HOSTNAME]
Parameter:
host HOSTNAME
Specify tacacs+ server host name, both IP address and domain name are available.
port <0-65535>
Specify tacacs+ server udp port
key TACPLUSKEY
Specify tacacs+ server key string
priority <0-65535>
Specify tacacs+ server priority
timeout <1-30>
Specify tacacs+ server timeout value
Default:
Default tacacs+ key is “”.
Default tacacs+ timeout is 5 seconds.
Mode:
Global Configuration
Usage Guide:
Use “tacacs host” command to add or edit tacacs+ server for authentication, authorization or accounting.
Use no form to delete one or all tacacs+ servers from database.
Example:
This example shows how to create a new tacacs+ server
Switch(config)#
tacacs host 192.168.1.111 port 12345 key tacacs+ priority 100 timeout
10
This example shows how to show existing tacacs+ server.
Switch# show tacacs
Prio | Timeout | IP Address | Port | Key