Planet WGSW-28040 - Clock Source; Clock Summer-Time

Command Guide of WGSW-28040
326
4.28.3 clock source
Command:
clock source (local|sntp)
Parameter:
local
Specify to use static time
sntp
Specify to use sntp time
Default:
Default is using local time.
Mode:
Global Configuration
Usage Guide:
Use the clock source command to set the source of time. The “local” means that use static setting by user manual
set. The “sntp” means that use remote SNTP server. Use the no form of this command to default setting.
Example:
The example shows how to set clock source of switch. You can verify settings by the following show show clock
command.
switch(config)# clock source sntp
switch(config)# show clock detail
08:32:12 test(UTC+5) Sep 21 2012
No time source
Time zone:
Acronym is DFL
Offset is UTC+8
4.28.4 clock summer-time
Command:
clock summer-time ACRONYM date
(jan|feb|mar|apr|may|jun|jul|aug|sep|oct|nov|dec) <1-31> <2000-2037> HH:MM
(jan|feb|mar|apr|may|jun|jul|aug|sep|oct|nov|dec) <1-31> <2000-2037> HH:MM