Planet WGSW-28040 - Show Rmon Event

Command Guide of WGSW-28040
278
==== Port gi1 =============================
etherStatsDropEvents : 0
etherStatsOctets : 0
etherStatsPkts : 0
etherStatsBroadcastPkts : 0
etherStatsMulticastPkts : 0
etherStatsCRCAlignErrors : 0
etherStatsUnderSizePkts : 0
etherStatsOverSizePkts : 0
etherStatsFragments : 0
etherStatsJabbers : 0
etherStatsCollisions : 0
etherStatsPkts64Octets : 0
etherStatsPkts65to127Octets : 0
etherStatsPkts128to255Octets : 0
etherStatsPkts256to511Octets : 0
etherStatsPkts512to1023Octets : 0
etherStatsPkts1024to1518Octets : 0
4.23.5 show rmon event
Command:
show rmon event (<1-65535> | all)
Parameter:
<1-65535>
specifies event index to show
all
Show all existed event
Mode:
Global Configuration
Usage Guide:
Use the show rmon event command to show existed RMON event entry.
Example:
The example shows how to show rmon event entry.