Planet WGSW-28040 Command Guide

Command Guide of WGSW-28040
347
Use the voice vlan id global configuration command to configure the VLAN identifier of the voice VLAN statically
You can verify your setting by entering the show voice vlan Privileged EXEC command
Example:
The following example shows how to set Voice VLAN ID, before make sure the VLAN EXIST.
Switch(config)# voice-vlan vlan 128
4.30.3 voice vlan oui-table
Command:
voice-vlan oui-table A:B:C DESCRIPTION
no voice-vlan oui-table A:B:C
Parameter:
A:B:C
Specify OUI Mac address to add or remove
DESCRIPTION
Specify description of the specified MAC address to the voice VLAN OUI table
Mode:
Global Configuration
Usage Guide:
Use the voice vlan oui-table global configuration command to add oui mac address to OUI Table
Use the no form of this command to remove all or specified oui mac address..
You can verify your setting by entering the show voice vlan Privileged EXEC command
Example:
This following example shows how to add OUI Mac.
Switch(config)#voice-vlan oui-table 00:01:02“Test”
4.30.4 voice vlan cos
Command:

Planet WGSW-28040 Specifications

General

Brand	Planet
Model	WGSW-28040
Category	Switch
Language	English