Command Guide of WGSW-28040
42
http | login | default
4.2.5 show aaa authentication
Command:
show aaa authentication (login | enable) lists
Parameter:
Show login authentication list
Show enable authentication list
Mode:
Privileged EXEC
Usage Guide:
Use “show aaa authentication” command to show login authentication or enable authentication method lists.
Example:
This example shows how to show existing login authentication lists
Switch# show aaa authentication login lists
Login List Name | Authentication Method List
-----------------+-------------------------------
default | local
test1 | tacacs+ radius local
This example shows how to show existing enable authentication lists
Switch# show aaa authentication login lists
Enable List Name | Authentication Method List
-----------------+-------------------------------
default | enable
test2 | tacacs+ radius enable
To Next Page
Loading...
Need help?
General