Planet WGSW-28040 - Show Snmp Host; Show Snmp User

Command Guide of WGSW-28040
293
Switch# show snmp community
4.24.14 show snmp host
Command:
show snmp host
Mode:
privileged mode
Usage Guide:
This command will display the snmp host entry.
Example:
The following example specifies that display snmp host test.
Switch# show snmp host
4.24.15 show snmp user
Command:
show snmp user
Mode:
privileged mode
Usage Guide:
This command will display the snmp user entry.
Example:
The following example specifies that display snmp user test.
Switch# show snmp user