Planet WGSW-28040 - End; Reboot

Command Guide of WGSW-28040
70
4.4.6 end
Command:
end
Mode:
Privileged EXEC
Global Configuration
Interface Configuration
Line Configuration
.......
Usage Guide:
Use “end” command to return to privileged EXEC mode directly. Every mode except User EXEC mode has the “end”
command.
Example:
This example shows how to enter Interface Configuration mode and use end command to go back to privileged EXEC
mode
Switch# configure
Switch(config)# interface gi1
Switch(config-if)# end
Switch#
4.4.7 reboot
Command:
reboot
Mode:
Privileged EXEC
Usage Guide:
Use “reboot” command to make system hot restart.
Example:
This example shows how to restart the system