Planet WGSW-28040 - Show Ipv6 Mld Snooping Groups Counters; Show Ipv6 Mld Snooping Groups

Command Guide of WGSW-28040
232
Usage Guide:
This command will clear the mld statistics.
The configure can use show ipv6 mld snooping.
Example:
This example shows how to clear ipv6 mld snooping statistics
Switch# clear ipv6 mld snooping statistics
Switch# show ipv6 mld snooping
4.17.14 show ipv6 mld snooping groups counters
Command:
show ipv6 mld snooping groups counters
Mode:
privileged mode
Usage Guide:
This command will display the ipv6 mld group counter include static group.
Example:
This example shows how to display ipv6 mld snooping group counter
Switch# show ipv6 mld snooping counters
4.17.15 show ipv6 mld snooping groups
Command:
show ipv6 mld snooping groups [(dynamic | static)]
Parameter:
none
Show ipv6 mld groups include dynamic and static
(dynamic | static)
Display ipv6 mld group type is dynamic or static