Planet WGSW-28040 - Show Gvrp

Command Guide of WGSW-28040
135
show gvrp error-statistics [interfaces IF_PORTS]
Parameter:
[interfaces
IF_PORTS]
Specifies posts
Mode:
Privileged Configuration
Usage Guide:
This command will display the ports error statistics or statistics info.
Example:
The following example specifies that display gvrp error statistics and statistics test.
Switch(config)# aaa authentication login test1 tacacs+ radius local
Switch# show gvrp statistics
Switch# show gvrp error-statistics
INVPROT : Invalid protocoal Id
INVATYP : Invalid Attribute Type INVALEN : Invalid Attribute Length
INVAVAL : Invalid Attribute Value INVEVENT: Invalid Event
Port | INVPROT | INVATYP | INVALEN | INVAVAL | INVEVENT
gi1 0 0 0 0 0
gi2 0 0 0 0 0
gi3 0 0 0 0 0
gi4 0 0 0 0 0
gi5 0 0 0 0 0
gi6 0 0 0 0 0
4.9.7 show gvrp
Command:
show gvrp
Mode:
privileged Configuration
Usage Guide: