Planet WGSW-28040 - Show Rmon History Statistics

Command Guide of WGSW-28040
281
Parameter:
<1-65535>
specifies history index to show
all
Show all existed history
Mode:
Global Configuration
Usage Guide:
Use the show rmon history command to show existed RMON history entry
Example:
The example shows how to show RMON history entry.
switch(config)# rmon history 1 interface gi1 interval 30 owner admin
switch(config)# show rmon history 1
Rmon History Index : 1
Rmon Collection Interface: gi1
Rmon History Bucket : 50
Rmon history Interval : 30
Rmon History Owner : admin
4.23.9 show rmon history statistics
Command:
show rmon history <1-65535> statistic
Parameter:
<1-65535>
specifies history index to show history statistic
Mode:
Global Configuration
Usage Guide:
Use the show rmon history statistic command to show statistics that are recorded by RMON history..
Example:
The example shows how to show RMON history statistics
switch(config)# show rmon history 1 statistics