Command Guide of WGSW-28040
154
---------+---------------------
gi1 : replace
gi2 : deny
gi3 : deny
gi4 : deny
gi5 : deny
gi6 : deny
4.10.15 clear ip igmp snooping groups
Command:
clear ip igmp snooping groups [(dynamic | static)]
Parameter:
IP igmp group type is dynamic or static
Mode:
Privileged Configuration
Usage Guide:
This command will clear the ip igmp groups for dynamic or static or all of type.
The configure can use ‘show ip igmp snooping groups’ to check.
Example:
The following example specifies that clear ip igmp snooping groups test.
Switch# clear ip igmp snooping groups static
Switch# show ip igmp snooping groups
Switch# clear ip igmp snooping groups
Switch# show ip igmp snooping groups
4.10.16 clear ip igmp snooping statistics
Command:
To Next Page
Loading...
Need help?
General