Command Guide of WGSW-28040
73
System Up Time : 0 days, 0 hours, 2 mins, 37 secs
4.4.10 system location
Command:
system location LOCATION
Parameter:
Mode:
Global Configuration
Usage Guide:
Use “system location” command to modify location information of the switch.
Example:
This example shows how to modify location information
Switch(config)# system location home
This example shows how to show system location information
Switch(config)# system location home
Switch# show info
System Name : SwitchEF0102
System Location : home
System Contact : Default Contact
MAC Address : 00:30:4f:EF:01:02
IP Address : 192.168.0.100
Subnet Mask : 255.255.255.0
Loader Version : 1.3.0.26225
Loader Date : Thu May 17 15:19:42 CST 2012
Firmware Version : 2.5.0-beta.32811
Firmware Date : Mon Sep 24 19:33:42 CST 2012
System Object ID : 1.3.6.1.4.1.27282.3.2.10
To Next Page
Loading...
Need help?
General