Planet WGSW-28040 - Ipv6 Mld Snooping Vlan Static-Port; Ipv6 Mld Snooping Vlan Static-Router-Port

Command Guide of WGSW-28040
224
4.17.6 ipv6 mld snooping vlan static-port
Command:
[no] ipv6 mld snooping vlan <VLAN-LIST> static-port IF_PORTS
[no] ipv6 mld snooping vlan <VLAN-LIST> forbidden-port IF_PORTS
Parameter:
VLAN-LIST
Specify VLAN ID list to set
IF_PORTS
Specify a port list to set or remove
Default:
None static/forbidden ports
Mode:
Global Configuration
Usage Guide:
‘ipv6 mld snooping vlan 1 static-port gi1-2’ will add static port gi1-2 for vlan 1. The all known vlan 1 ipv6 group
will add the static ports.
‘ipv6 mld snooping vlan 1 forbidden-port gi3-4’ will add forbidden port gi3-4 for vlan 1. The all known vlan 1 ipv6
group will remove the forbidden ports.
The configuration can use ‘show ipv6 mld snooping forward-all’.
Example:
This example shows how to set ipv6 mld snooping static/forbidden port
Switch(config)# ipv6 mld snooping vlan 1 static -port gi1-2
Switch(config)# ipv6 mld snooping vlan 1 forbidden -port gi3-4
Switch# show ipv6 mld snooping forward-all vlan 1
MLD Snooping VLAN : 1
MLD Snooping static port : gi1-2
MLD Snooping forbidden port : gi3-4
4.17.7 ipv6 mld snooping vlan static-router-port
Command: