Planet WGSW-28040 - Clear Logging Flash | Buffered

Command Guide of WGSW-28040
208
2| Jan 01 08:00:42| STP| info| Port 1 STP port state is set to Learning
3| Jan 01 08:00:30| AAA| info| User '' enter privileged mode from console with level '15'
success
4| Jan 01 08:00:28| AAA| info| User '' is authorized with privilege level 1
5| Jan 01 08:00:28| AAA| info| User '' login from console success
6| Jan 01 08:00:24| System| info| Sysinfo variable 'resetdefault' is set to value '0'
7| Jan 01 08:00:23| System| notice| System Startup!
4.14.6 clear logging flash | buffered
Command:
clear logging (flash|buffered)
Parameter:
flash
Specify showing the messages logged to flash.
buffered
Specify showing the messages logged to RAM.
Mode:
Global Configuration
Privileged Configuration
Usage Guide:
Clear the message logged to flash/RAM.
clear logging flash
Clear the messages logged to flash.
clear logging buffered
Clear the messages logged to RAM.
Example:
Switch# show logging buffered
Log messages in buffered
NO.| Timestamp | Category | Severity | Message
---------------------+----------------+----------+----------------------------------------
1| Jan 01 08:00:57| STP| info| Port 1 STP port state is set to Forwarding