Planet WGSW-28040 - Clear Ip Dhcp Snooping Database Statistics

Command Guide of WGSW-28040
115
snooping database command.
switch(config)# ip dhcp snooping database timeout 60
switch(config)# do show ip dhcp snooping database
Type : tftp: 192.168.1.50
FileName : backup_file
Write delay Timer : 300 seconds
Abort Timer : 60 seconds
Agent Running : Running
Delay Timer Expiry : 300 seconds
Abort Timer Expiry : 299
Last Succeded Time : None
Last Failed Time : None
Last Failed Reason : No failure recorded.
Total Attempts : 1
Successful Transfers : 0 Failed Transfers : 0
Successful Reads : 0 Failed Reads : 0
Successful Writes : 0 Failed Writes : 0
4.6.18 clear ip dhcp snooping database statistics
Command:
clear ip dhcp snooping database statistics
Mode:
Global Configuration
Usage Guide:
Use the clear ip dhcp snooping database statistics command to clear statistics of DHCP Snooping databae.
Example:
The example shows how to clear statistics of DHCP Snooping agent. You can verify settings by the following show ip
dhcp snooping database command.
switch# clear ip dhcp snooping database statistics
switch# show ip dhcp snooping database
Type : tftp: 192.168.1.50
FileName : backup_file