Planet WGSW-28040 - System Name

Command Guide of WGSW-28040
71
Switch# reboot
4.4.8 system name
Command:
system name NAME
Parameter:
NAME
Specify system name string.
Mode:
Global Configuration
Usage Guide:
Use “system name” command to modify system name information of the switch. The system name is also used to be
CLI prompt.
Example:
This example shows how to modify contact information
Switch(config)# system name myname
myname(config)#
This example shows how to show system name information
Switch# show info
System Name : myname
System Location : Default Location
System Contact : Default Contact
MAC Address : 00:30:4F:EF:01:02
IP Address : 192.168.0.100
Subnet Mask : 255.255.255.0
Loader Version : 1.3.0.26225
Loader Date : Thu May 17 15:19:42 CST 2012
Firmware Version : 2.5.0-beta.32811
Firmware Date : Mon Sep 24 19:33:42 CST 2012
System Object ID : 1.3.6.1.4.1.27282.3.2.10