Planet WGSW-28040 - Renew Ip Dhcp Snooping Database

Command Guide of WGSW-28040
116
Write delay Timer : 300 seconds
Abort Timer : 60 seconds
Agent Running : Running
Delay Timer Expiry : 300 seconds
Abort Timer Expiry : 299
Last Succeded Time : None
Last Failed Time : None
Last Failed Reason : No failure recorded.
Total Attempts : 0
Successful Transfers : 0 Failed Transfers : 0
Successful Reads : 0 Failed Reads : 0
Successful Writes : 0 Failed Writes : 0
4.6.19 renew ip dhcp snooping database
Command:
renew ip dhcp snooping database
Mode:
Global Configuration
Usage Guide:
Use the renew ip dhcp snooping database command to renew DHCP Snooping database from backup file.
Example:
The example shows how to renew DHCP Snooping database. You can verify settings by the following show ip dhcp
snooping database and show ip dhcp snooping binding command.
switch# show ip dhcp snooping database
Type : tftp: 192.168.1.50
FileName : backup_file
Write delay Timer : 300 seconds
Abort Timer : 60 seconds
Agent Running : Running
Delay Timer Expiry : 300 seconds
Abort Timer Expiry : 299
Last Succeded Time : None