Planet WGSW-28040 - Clear Ipv6 Mld Snooping Groups; Clear Ipv6 Mld Snooping Statistics

Command Guide of WGSW-28040
231
4.17.12 clear ipv6 mld snooping groups
Command:
clear ipv6 mld snooping groups [(dynamic | static)]
Parameter:
None
Clear ipv6 mld groups include dynamic and static
(dynamic | static)
ipv6 mld group type is dynamic or static
Default:
clear all ipv6 mld groups
Mode:
Privileged mode
Usage Guide:
This command will clear the ipv6 mld groups for dynamic or static or all of type.
The configuration can use ‘show ipv6 mld snooping groups’ to check.
Example:
This example shows how to clear ipv6 mld snooping groups
Switch# clear ipv6 mld snooping groups static
Switch# show ipv6 mld snooping groups
Switch# clear ipv6 mld snooping groups
Switch# show ipv6 mld snooping groups
4.17.13 clear ipv6 mld snooping statistics
Command:
clear ipv6 mld snooping statistics
Mode:
privileged mode