Planet WGSW-28040 - Security

Command Guide of WGSW-28040
145
4.10.8 ip igmp snooping vlan parameters
Command:
ip igmp snooping vlan <VLAN-LIST> last-member-query-count <1-7>
no ip igmp snooping vlan <VLAN-LIST> last-member-query-count
ip igmp snooping vlan <VLAN-LIST> last-member-query-interval <1-60>
no ip igmp snooping vlan <VLAN-LIST> last-member-query-interval
[no] ip igmp snooping vlan <VLAN-LIST> router learn pim-dvmrp
[no] ip igmp snooping vlan <VLAN-LIST> fastleave
ip igmp snooping vlan <VLAN-LIST> query-interval <30-18000>
no ip igmp snooping vlan <VLAN-LIST> query-interval
ip igmp snooping vlan <VLAN-LIST> response-time <5-20>
no ip igmp snooping vlan <VLAN-LIST> response-time
ip igmp snooping vlan <VLAN-LIST> robustness-variable <1-7>
no ip igmp snooping vlan <VLAN-LIST> robustness-variable
Parameter:
VLAN-LIST
specifies VLAN ID list to set
last-member-query-
count <1-7>
specifies last member query count to set. Default is 2
last-member-query-
interval <1-60>
specifies last member query interval to set. Default is 1
query-interval
<30-18000>
specifies query interval to set. Default is 125
response-time
<5-20>
specifies a response time to set. default is 10
robustness-
specifies a robustness value to set, default is 2