Planet WGSW-28040 - Ip Igmp Filter

Command Guide of WGSW-28040
151
Switch(config-igmp-profile)# profile range ip 224.1.1.1 224.1.1.8 action permit
Switch(config-igmp-profile)#show ip igmp profile
IP igmp profile index: 1
IP igmp profile action: permit
Range low ip: 224.1.1.1
Range high ip: 224.1.1.8
Switch(config-igmp-profile)#exit
Switch(config)# ip igmp profile 10
Switch(config-igmp-profile)# profile range ip 224.1.1.5 224.1.1.10 action deny
Switch(config-igmp-profile)#show ip igmp profile
IP igmp profile index: 10
IP igmp profile action: deny
Range low ip: 224.1.1.5
Range high ip: 224.1.1.10
Switch(config-igmp-profile)#exit
Switch(config)# exit
Switch# show ip igmp profile
IP igmp profile index: 1
IP igmp profile action: permit
Range low ip: 224.1.1.1
Range high ip: 224.1.1.8
IP igmp profile index: 10
IP igmp profile action: deny
Range low ip: 224.1.1.5
Range high ip: 224.1.1.10
4.10.13 ip igmp filter
Command:
ip igmp filter <1-128>
[no] ip igmp filter
show ip igmp filter [interfaces IF_PORTS]
Parameter: