Planet WGSW-28040 - Clear Rmon Interfaces Statistics

Command Guide of WGSW-28040
277
switch(config)# rmon history 1 interface gi1 interval 60 owner admin
switch(config)# show rmon history 1
Rmon History Index : 1
Rmon Collection Interface: gi1
Rmon History Bucket : 50
Rmon history Interval : 60
Rmon History Owner : admin
switch(config)# rmon history 1 interface gi1 interval 30 owner admin
switch(config)# show rmon history 1
Rmon History Index : 1
Rmon Collection Interface: gi1
Rmon History Bucket : 50
Rmon history Interval : 30
Rmon History Owner : admin
4.23.4 clear rmon interfaces statistics
Command:
clear rmon interfaces IF_PORTS statistics
Parameter:
IF_PORTS
specifies ports to clear
Mode:
Global Configuration
Usage Guide:
Use the clear rmon interfaces statistics command to clear RMON etherStat statistics those are recorded on
interface.
Example:
The example shows how to clear RMON etherStat statistics on interface gi1. You can verify settings by the following
show rmon interface statistics command.
switch# clear rmon interfaces gi1 statistics
switch# show rmon interfaces gi1 statistics