Planet WGSW-28040 - Vlan; Vlan Name

Command Guide of WGSW-28040
331
4.29 VLAN
4.29.1 vlan
Command:
vlan
no vlan
Mode:
Global Configuration
Usage Guide:
Create or remove a VLAN entry. Using `vlan` command to entry the VLAN configuration mode.
Example:
The following example creates and removes a VLAN entry (100).
Switch# configure
Switch (config)# vlan 100
Switch (config-vlan)# exit
Switch (config)# no vlan 100
Switch (config)# exit
Switch#
4.29.2 vlan name
Command:
vlan name NAME
Parameter:
NAME
Specify the name of the VLAN (Max. 32 chars).
Mode: