Planet WGSW-28040 - Show Ip Igmp Port Max-Group

Command Guide of WGSW-28040
161
Mode:
Privileged Configuration
Usage Guide:
This command will display ip igmp port filter info.
Example:
The following example specifies that show ip igmp filter test.
Switch# show ip igmp filter
Port ID | Profile ID
---------+--------------
gi1 : 1
gi2 : None
gi3 : None
gi4 : None
gi5 : None
--More--
4.10.26 show ip igmp port max-group
Command:
show ip igmp max-group [interfaces IF_PORTS]
Parameter:
[interfaces
IF_PORTS]
Show specifies ports max-group
Mode:
Privileged Configuration
Usage Guide:
This command will display ip igmp port max-group.
Example:
The following example specifies that show ip igmp max-group test.
Switch(config)# aaa authentication login test1 tacacs+ radius local
Switch(config)#interface gi1