Command Guide of WGSW-28040
88
Switch(config-line)# silent-time 20
Switch(config-line)# exit
This example shows how show line information.
Switch# show line
Console ==============================
Session Timeout : 10 (minutes)
History Count : 128
Password Retry : 3
Silent Time : 10 (seconds)
Telnet ===============================
Telnet Server : disabled
Session Timeout : 10 (minutes)
History Count : 128
Password Retry : 3
Silent Time : 15 (seconds)
SSH ==================================
SSH Server : disabled
Session Timeout : 10 (minutes)
History Count : 128
Password Retry : 3
Silent Time : 20 (seconds)
4.4.26 history
Command:
history <1-256>
Parameter:
Specify maximum CLI history entry number.
Default: