Planet WGSW-28040 Command Guide

Command Guide of WGSW-28040
89
Default maximum history entry number is 128.
Mode:
line Configuration
Usage Guide:
Use “history” command to specify the maximum commands history number for CLI running on console, telnet or ssh
service. Every command input by user will record in history buffer. If all history commands exceed configured history
number, older ones will be deleted from buffer.
Use “no history” to disable the history feature. And use “show history” to show all history commands.
Example:
This example shows how to change console history number to 100, telnet history number to 150 and ssh history
number to 200.
Switch(config)# line console
Switch(config-line)# history 100
Switch(config-line)# exit
Switch(config)# line telnet
Switch(config-line)# history 150
Switch(config-line)# exit
Switch(config)# line ssh
Switch(config-line)# history 200
Switch(config-line)# exit
This example shows how show line information.
Switch# show line
Console ==============================
Session Timeout : 10 (minutes)
History Count : 100
Password Retry : 3
Silent Time : 0 (seconds)
Telnet ===============================
Telnet Server : disabled
Session Timeout : 10 (minutes)
History Count : 150
Password Retry : 3
Silent Time : 0 (seconds)
SSH ==================================
SSH Server : disabled

Planet WGSW-28040 Specifications

General

Brand	Planet
Model	WGSW-28040
Category	Switch
Language	English