Planet WGSW-28040 - Spanning-Tree Maximum-Age; Spanning-Tree Tx-Hold-Count

Command Guide of WGSW-28040
307
This command configures the BPDU forward-delay interval (second). The configuration could be shown by “show
spanning-tree” command.
Example:
This example sets the BPDU forward-delay to 30 sec.
Switch# configure
Switch(config)# spanning-tree forward-delay 30
4.26.8 spanning-tree maximum-age
Command:
spanning-tree maximum-age <6-40>
Parameter:
<6-40>
Specify the maximum-age time (second).
Default:
spanning-tree maximum-age = 20
Mode:
Global Configuration
Usage Guide:
This command configures the BPDU maximum-age interval (second). The configuration could be shown by “show
spanning-tree” command.
Example:
This example sets the BPDU maximum-age to 10 sec.
Switch# configure
Switch(config)# spanning-tree maximum-age 10
4.26.9 spanning-tree tx-hold-count
Command: