Planet WGSW-28040 - Show Ip Igmp Profile; Show Ip Igmp Port Filter

Command Guide of WGSW-28040
160
4.10.24 show ip igmp profile
Command:
show ip igmp profile [<1-128>]
Parameter:
[<1-128>]
Show specifies index profile info
Mode:
Privileged Configuration
Usage Guide:
This command will display ip igmp profile info.
Example:
The following example specifies that show ip igmp profile test.
Switch# show ip igmp profile
IP igmp profile index: 1
IP igmp profile action: permit
Range low ip: 224.1.1.1
Range high ip: 224.1.1.8
IP igmp profile index: 2
IP igmp profile action: deny
Range low ip: 225.1.1.0
Range high ip: 225.1.2.1
4.10.25 show ip igmp port filter
Command:
show ip igmp filter [interfaces IF_PORTS]
Parameter:
[interfaces
IF_PORTS]
Show specifies ports filter