Planet WGSW-28040 - Show Sntp

Command Guide of WGSW-28040
330
SNTP is Enabled
SNTP Server address: 192.168.1.100
SNTP Server port: 123
4.28.7 show sntp
Command:
show sntp
Mode:
Global Configuration
Usage Guide:
Use the show sntp command to remote SNTP server information.
Example:
The example shows how to show remote SNTP server.
Switch(config)# show sntp
SNTP is Enabled
SNTP Server address: 192.168.1.100
SNTP Server port: 123