Planet WGSW-28040 Command Guide

Command Guide of WGSW-28040
140
Mode:
Global Configuration
Usage Guide:
‘ip igmp snooping version 3’, then will support v3 basic mode. When change version from v3 to v2. the all querier
version will update to version 2.
The configure can use ‘show ip igmp snooping’.
Example:
The following example specifies that set ip igmp snooping version 3 test.
Switch(config)# ip igmp snooping version 3
Switch# show ip igmp snooping
IGMP Snooping Status
--------------------
Snooping : Enabled
Report Suppression : Disabled
Operation Version : v3
Forward Method : mac
Unknown Multicast Action : Flood
4.10.4 ip igmp snooping unknown-multicast action
Command:
ip igmp snooping unknown-multicast action (drop | flood |router-port)
Parameter:
(drop | flood
|router-port)
Unknown multicast action for drop|flood|router-port
Default:
ip igmp snooping unknown-multicast action flood
Mode:
Global Configuration
Usage Guide:
When igmp snooping and mld snooping disabled, it can’t set action router-port.
When disable igmp snooping & mld snooping, it set unknown multicast action flood.

Planet WGSW-28040 Specifications

General

Brand	Planet
Model	WGSW-28040
Category	Switch
Language	English