Planet WGSW-28040 - Radius Default-Config

Command Guide of WGSW-28040
47
Prio | Timeout | IP Address | Port | Key
------+---------+------------------+--------+----------
100 | 10 | 192.168.1.111 | 12345 | tacacs+
4.2.11 radius default-config
Command:
radius default-config [key RADIUSKEY] [retransmit <1-10>] [timeout <1-30>]
Parameter:
key RADIUSKEY
Specify default radius server key string
retransmit <1-10>
Specify default radius server retransmit value
timeout <1-30>
Specify default radius server timeout value
Default:
Default radius key is “”.
Default radius retransmit is 3 times.
Default radius timeout is 3 seconds.
Mode:
Global Configuration
Usage Guide:
Use “radius default-config” command to modify default values of radius server. These default values will be used
when user try to create a new radius server and not assigned these values.
Example:
This example shows how modify default radius configuration
Switch(config)# radius default-config timeout 20
Switch(config)# radius default-config key radiuskey
Switch(config)# radius default-config retransmit 5
This example shows how to show default radius configurations.
Switch# show radius default-config
Retries| Timeout| Key
--------+--------+---------