Planet WGSW-28040 Command Guide

Command Guide of WGSW-28040
348
voice-vlan cos <0-7> [remark]
no voice-vlan
Parameter:
<0-7>
Specify the voice VLAN Class of Service value in telephone oui mode
remark
Specify that the L2 user priority is remarked with the CoS value
Default:
The default cos value is 6, remark is disabled.
Mode:
Global Configuration
Usage Guide:
Use the voice vlan cos global configuration command to configure the voice VLAN cos value and 1p remark function
You can verify your setting by entering the show voice vlan Privileged EXEC command
Example:
The following example show how to set cos value and enable 1p remark function
Switch(config)# voice-vlan cos 7 remark
4.30.5 voice vlan aging-time
Command:
voice-vlan aing-time <30-65536>
Parameter:
<30-65536>
Specify the voice VLAN aging timeout interval in minutes
Default:
The default aging-timeout value is 1440 minutes
Mode:
Global Configuration
Usage Guide:
Use the voice vlan aging-time global configuration command to configure the voice VLAN aging timeout
You can verify your setting by entering the show voice vlan Privileged EXEC command

Planet WGSW-28040 Specifications

General

Brand	Planet
Model	WGSW-28040
Category	Switch
Language	English