Planet WGSW-28040 - Show Flash

Command Guide of WGSW-28040
322
Usage Guide:
Our configuration file is text based. Therefore, we can show the configuration on terminal and read it by this
command.
Example:
This example shows how to show running configuration
Switch# show running-config
! System Description: Switch
! System Version: v2.5.0-beta.32811
! System Name: SwitchEF0102
! System Up Time: 0 days, 5 hours, 23 mins, 42 secs
!
!
!
!
username "" privilege user secret "dnXencJRwflV6"
username "admin" secret "FzjrGO6vfbERY"
voice-vlan vpt 0
voice-vlan dscp 0
.........................................................
4.27.7 show flash
Command:
show flash
Mode:
Privileged EXEC
Usage Guide:
Use “show flash” command to show all files’ status which stored in flash.
Example:
This example shows how to show all files status stored in flash.
Switch# show flash
File Name File Size Modified