Planet WGSW-28040 - Port; Description

Command Guide of WGSW-28040
247
4.20 Port
4.20.1 description
Command:
description WORD<1-32>
no description
Parameter:
WORD<1-32>
Specifiy port description string
Mode:
Interface Configuration
Usage Guide:
Use “description” command to give the port a name to identify it easily.
If description includes space character, please use double quoted to wrap it.
Use no form to restore description to empty string.
Example:
This example shows how to modify port descriptions.
Switch(config)# interface gi1
Switch(config-if)# description userport
Switch(config-if)# exit
Switch(config)# interface gi2
Switch(config-if)# description “uplink port”
This example shows how to show current port description on interface fa1 and fa2
Switch# show interfaces gi1-2 status
Port Name Status Vlan Duplex Speed Type
gi1 userport notconnect 1 auto auto Copper
gi2 uplink port notconnect 1 auto auto Copper