Planet WGSW-28040 - Spanning-Tree Bpdu; Spanning-Tree Mode

Command Guide of WGSW-28040
302
Switch#
4.26.2 spanning-tree bpdu
Command:
spanning-tree bpdu ( filtering | flooding )
Parameter:
( filtering |
flooding )
Specify the forwarding action of BPDU to filtering or flooding.
Default:
spanning-tree bpdu flooding
Mode:
Global Configuration
Usage Guide:
Configure the BPDU forwarding action when STP is disabled.
Example:
This example sets the BPDU forwarding action to filtering.
Switch# configure
Switch(config)# no spanning-tree
Switch(config)# spanning-tree bpdu filtering
Switch(config)# exit
Switch# show spanning-tree
Spanning tree disabled (BPDU filtering) mode RSTP
Default port cost method: long
Switch#
4.26.3 spanning-tree mode
Command: