Planet WGSW-28040 - Show Ip Igmp Snooping Forward-All

Command Guide of WGSW-28040
159
Switch# show ip igmp snooping vlan
IGMP Snooping is globaly enabled
IGMP Snooping VLAN 1 admin : disabled
IGMP Snooping operation mode : disabled
IGMP Snooping robustness: admin 2 oper 2
IGMP Snooping query interval: admin 125 sec oper 125 sec
IGMP Snooping query max response : admin 10 sec oper 10 sec
IGMP Snooping last member query counter: admin 2 oper 2
IGMP Snooping last member query interval: admin 1 sec oper 1 sec
IGMP Snooping last immediate leave: disabled
IGMP Snooping automatic learning of multicast router ports: enabled
4.10.23 show ip igmp snooping forward-all
Command:
show ip igmp snooping forward-all [vlan VLAN-LIST]
Parameter:
[vlan VLAN-LIST]
Show specifies vlan of ip igmp forward info.
Mode:
Privileged Configuration
Usage Guide:
This command will display ip igmp snooping forward all info.
Example:
The following example specifies that show ip igmp snooping forward-all test.
Switch# show ip igmp snooping forward-all
IGMP Snooping VLAN : 1
IGMP Snooping static port : None
IGMP Snooping forbidden port : None