Command Guide of WGSW-28040
218
4.17 MLD Snooping
4.17.1 ipv6 mld snooping
Command:
ipv6 mld snooping
no ipv6 mld snooping
Default:
Disabled
Mode:
Global Configuration
Usage Guide:
‘no ipv6 mld snooping’ will clear all ipv6 mld snooping dynamic group and dynamic router port, and make the
static ipv6 mld group invalid. Then do not learning the dynamic group and router port by mld message.
The configure can use ‘show ipv6 mld snooping’
Example:
This example shows how to specify that set ipv6 mld snooping test.
Switch(config)# ipv6 mld snooping
Switch# show ipv6 mld snooping
MLD Snooping Status
--------------------
Snooping : Enabled
Report Suppression : Enabled
Operation Version : v1
Forward Method : mac
Unknown Multicast Action : Flood
Switch(config)# no ipv6 mld snooping
Switch# show ipv6 mld snooping
MLD Snooping Status
To Next Page
Loading...
Need help?
General