Planet WGSW-28040 - Page 130

Command Guide of WGSW-28040
130
switch# show ip arp inspection interface gi1
Interfaces | Trust State | Rate (pps) | SMAC Check | DMAC Check | IP Check/Allow Zero |
------------+--------------+--------------+----------------|-----------------+-------------------------+
gi1 | Trusted | None | disabled | disabled | disabled/disabled
The example shows how to show statistics of interface gi1.
Switch(config)# aaa authentication login test1 tacacs+ radius local
switch# show ip arp inspection interfaces gi1 statistics
Port| Forward |Source MAC Failures|Dest MAC Failures| SIP Validation Failures|DIP
Validation Failures|IP-MAC Mismatch Failures
----+---------+------------+-------------+------------+--------------+-------------------
gi1| 0 | 0 | 0 | 0 | 0 | 0