Planet WGSW-28040 Command Guide

Command Guide of WGSW-28040
319
flash://backup-config
flash://image0
flash://image1
flash://ram.log
flash://flash.log
tftp://
Specify remote tftp server and remote file name. The format is
“tftp://192.168.1.111/remote_file_name”
running-config
Running configuration file
startup-config
Startup configuration file
backup-config
Edit default authentication list
Mode:
Privileged EXEC
Usage Guide:
There are many types of files in system. These files are very important for administrator to manage the switch. The
most common file operation is copy. By using these copy commands, we can upgrade, backup following type of files.
Firmware Image
 Configuration Files
 Syslog Files
Example:
This example shows how to copy running configuration to startup configuration.
Switch# copy running-config startupst-config
This example shows how to backup running configuration to remote tftp server 192.168.111 with file name test1.cfg.
Switch# copy running-config tftp://192.168.1.111/test1.cfg
Uploading file...Please Wait...
Uploading Done
This example shows how to upgrade startup configuration from remote tftp server 192.168.1.111 with file name
test2.cfg.
Switch# copy tftp://192.168.1.111/test2.cfg startup-config
Downloading file...Please Wait...
Downloading Done
Upgrade config success. Do you want to reboot now? (y/n)n

Planet WGSW-28040 Specifications

General

Brand	Planet
Model	WGSW-28040
Category	Switch
Language	English