Bit Switches
SM 77 D393
Fax Option
Type C5000
(D393)
30 min1
Bit 5: 1, Bit 4: 0
1 hour
Bit 5: 1, Bit 4: 1
24 hours
6-7
Not used
Do not change
System Switch 16 [SP No. 1-101-023]
No FUNCTION COMMENTS
0
Parallel Broadcasting
0: Disabled
1: Enabled
1: The machine sends messages simultaneously
using all available ports during broadcasting.
1
Priority setting for the G3 line.
0: PSTN-1 > PSTN-2 or 3
1: PSTN-2 or 3 > PSTN-1
This function allows the user to select the default
G3 line type. The optional SG3 unit(s) are required
to use the PSTN-2 or 3 setting.
2-7
Not used
Do not change these settings.
System Switch 17 - Not used (do not change these settings)
System Switch 18 - Not used (do not change these settings)
System Switch 19 [SP No. 1-101-026]
No FUNCTION COMMENTS
0-5
Not used
Do not change the settings.
6
Extended scanner page
memory after memory option
is installed
0: Disabled
0: After installing the memory expansion option, the
scanner page memory is extended to 4 MB from 2
MB.
1: If this bit is set to 1 after installing the memory
To Next Page
Loading...
