Main SP Tables-1
SM 5-11 D086/D087
System
Maintenance
1007 [By-Pass Size Detection] By-Pass Size Detection Display
001
LG *ENG
[0 or 1 / 0 / - ] 0: OFF, 1: ON
Enables or disables the automatic paper size detection function of the by-pass
tray.
This SP determines what paper size the machine detects if the detected size is
less than 8.5”.
0: OFF (Letter/SEF), 1: ON (Legal/SEF)
1101
[Reload Permit Setting]
Specifies the settings of the reload permit for cold temperature in color mode.
001 Pre-rotation Start Temp. *ENG
[0 to 200 / 0 / 1 deg/step]
002 Reload Target Temp.:Center *ENG
[120 to 180 / 150 / 1 deg/step]
003 Reload Target Temp.:Press *ENG
[0 to 200 / 120 / 1 deg/step]
004 Temp.:Delta:Cold:Center *ENG
[0 to 200 / 5 / 1 deg/step]
005 Temp.:Delta:Cold:End *ENG
[40 to 200 / 100 / 1 deg/step]
006 Temp.:Delta:Cold:Press *ENG
[0 to 200 / 65 / 1 deg/step]
[Forced Ready Set]
Specifies the setting of the forced reload permit for cold temperature in color mode.
007 Time:Cold *ENG
[0 to 100 / 30 / 1 sec/step]
[Reload Permit Setting]
Specifies the settings of the reload permit for warm temperature in color mode.
008 Temp.:Delta:Warm:Center *ENG
[0 to 200 / 5 / 1 deg/step]
009 Temp.:Delta:Warm:End *ENG
[40 to 200 / 100 / 1 deg/step]
010 Temp.:Delta:Warm:Press *ENG
[0 to 200 / 65 / 1 deg/step]
[Forced Ready Set]
Specifies the setting of the forced reload permit for warm temperature in color
mode.