Main SP Tables-1
D086/D087 5-12 SM
011 Time:Warm *ENG
[0 to 100 / 30 / 1 sec/step]
[Reload Permit Setting]
Specifies the settings of the reload permit for hot temperature in color mode.
012 Temp.:Delta:Hot:Center *ENG
[0 to 200 / 5 / 1 deg/step]
013 Temp.:Delta:Hot:End *ENG
[40 to 200 / 100 / 1 deg/step]
014 Temp.:Delta:Hot:Press *ENG
[0 to 200 / 65 / 1 deg/step]
[Forced Ready Set]
Specifies the setting of the forced reload permit for hot temperature in color mode.
015 Time:Hot *ENG
[0 to 100 / 30 / 1 sec/step]
[Reload Permit Setting Temp.]
Specifies the settings of the reload permit for cold temperature in BW mode.
016 Temp.:Delta:Cold:BW:Center *ENG
[0 to 200 / 15 / 1 deg/step]
017 Temp.:Delta:Cold:BW:End *ENG
[40 to 200 / 100 / 1 deg/step]
018 Temp.Delta:Cold:BW:Press *ENG
[0 to 200 / 70 / 1 deg/step]
[Forced Ready Set]
Specifies the setting of the forced reload permit for cold temperature in BW mode.
019 Time:Cold:BW *ENG
[0 to 100 / 30 / 1 sec/step]
[Reload Permit Setting]
Specifies the settings of the reload permit for cold temperature in BW mode 2.
020 Temp.:Delta:Cold:BW2:Center *ENG
[0 to 200 / 15 / 1 deg/step]
021 Temp.:Delta:Cold:BW2:End *ENG
[40 to 200 / 100 / 1 deg/step]
022 Temp.Delta:Cold:BW2:Press *ENG
[0 to 200 / 100 / 1 deg/step]
[Forced Ready Set]
Specifies the setting of the forced reload permit for cold temperature in BW mode 2.
023 Time:Cold:BW2 *ENG
[0 to 100 / 30 / 1 sec/step]