Main SP Tables-1
SM 5-29 D086/D087
System
Maintenance
005
Depressure Position *ENG
[0 to 10,000 / 220 / 10 msec/step]
Specifies the rotation time of the pressure roller contact motor for the
depression position (no pressure).
010
Shift Time *ENG
[0 to 3600 / 5 / 1 sec/step]
Specifies the timing for depressing the fusing unit. If the machine does not get
any jobs for specified time by this SP after copying or printing, the machine
depresses the fusing unit.
101 Pressure:Plain1/2 *ENG
[0 to 3 / 3 / 1 /step]
Sets the default pressure position of the fusing unit for each paper type in
normal speed.
0: Depression position (no pressure)
1: Position 1 (less pressure)
2: Position 2
3: Position 3 (strongest pressure)
102 Pressure:Thin *ENG
[0 to 3 / 3 / 1 /step]
103 Pressure:M-thick *ENG
[0 to 3 / 3 / 1 /step]
104 Pressure:Thick1 *ENG
[0 to 3 / 3 / 1 /step]
105 Pressure:Thick2 *ENG
[0 to 3 / 3 / 1 /step]
106 Pressure:Thick3 *ENG
[0 to 3 / 3 / 1 /step]
107 Pressure:Special1 *ENG
[0 to 3 / 3 / 1 /step]
108 Pressure:Special2 *ENG
[0 to 3 / 3 / 1 /step]
109 Pressure:Special3 *ENG
[0 to 3 / 3 / 1 /step]
110 Pressure:Envelope *ENG
[0 to 3 / 1 / 1 /step]
To Next Page
Loading...
