Main SP Tables-2
D086/D087 5-68 SM
010 Thick 2&FINE: M *ENG
011 Thick 2&FINE: C *ENG
012 Thick 2&FINE: Y *ENG
2229
[Development DC Vias] Development DC Bias Adjustment
Adjusts the development bias.
Development bias is automatically adjusted during process control; therefore,
adjusting these settings has no effect while Process Control (SP3-041-001
Default: ON) is activated.
After deactivating Process Control with SP3-041-001, the values in these SP
modes are used for printing.
Plain: High speed, Thick 1: Middle speed, Thick 2&Fine: Low speed
001 Plain: Bk *ENG
[0 to 800 / 550 / 10 –V/step]
002 Plain: M *ENG
003 Plain: C *ENG
004 Plain: Y *ENG
005 Thick 1: Bk *ENG
006 Thick 1: M *ENG
007 Thick 1: C *ENG
008 Thick 1: Y *ENG
009 Thick 2&FINE:Bk *ENG
010 Thick 2&FINE:M *ENG
011 Thick 2&FINE:C *ENG
012 Thick 2&FINE:Y *ENG